The power system is the core support for the water tank transport tricycle's heavy-load operation. The vehicle provides three options of single-cylinder water-cooled engines: 200cc, 250cc and 300cc. The best-selling 250cc model has a rated power of over 1000W, and its power tuning is biased towards low-speed high-torque output, fully matching the working characteristics of water transport vehicles such as heavy-load starting and continuous climbing. Under full load condition, the grade ability of the vehicle can reach 15°-20°, and the maximum driving speed on paved roads covers 50-70km/h, ensuring transportation efficiency while reserving sufficient safety redundancy. The complete water-cooling system is equipped with an independent heat dissipation module, which can stably control the engine operating temperature during long-time continuous operation in high-temperature environments, avoiding power decline caused by heat fade, reducing high-temperature component loss and extending the engine overhaul cycle. The transmission end is matched with a full-floating 220-type booster rear axle with high torque transmission efficiency, delivering no jerk during heavy-load starting and no power interruption during climbing. The brake system adopts a layout of front drum brake + rear hydraulic drum brake. The rear hydraulic brake delivers linear and controllable braking force, with stable braking distance when going downhill with full load. Its braking synchronization and reliability both meet the special requirements of heavy-load water transport. The vehicle adopts a 12V standard electrical system matched with a high-torque starter motor, which has a high starting success rate in construction sites and rural areas with frequent start-stop cycles, and is suitable for grassroots use environments.

Advantage

The water tank transport tricycle quality and reliability have been verified by the whole process quality control. The whole vehicle has passed the national CCC compulsory certification, and all core components implement unified production and testing standards. With a curb weight of ≥500kg, the body structure strength has been specially verified under heavy-load working conditions, and can adapt to continuous operation on complex road conditions. The front suspension is equipped with 09-type spring shock absorbers, whose damping parameters are tuned for unpaved roads, which can effectively filter road bumps and improve driving smoothness. The rear suspension adopts a multi-leaf spring structure with strong static load capacity and is not easy to deform under long-term full-load use. The open cab adopts integral stamped body panels with uniform joints and strong paint adhesion, which is not easy to rust and fade when used outdoors. The fuel tank capacity ranges from 10L to 20L, and the full-fuel cruising range can meet the demand of single-day long-distance operation, reducing the frequency of mid-way refueling. A closed toolbox is installed on the side of the body, which can store maintenance tools and wearing parts, so that minor faults can be handled on site. All wearing parts adopt general specifications, which are convenient to purchase and replace, and the later operation and maintenance cost is low. The whole vehicle has gone through multiple quality inspection procedures from parts warehousing to finished product offline. The three core modules of engine, tank and chassis are tested separately to ensure the reliability and durability of delivered vehicles.

Product Specifications

Certification	CCC	Use For	Cargo
Driving Type	Motorized	Payload Capacity	1000L/1500L
Maximum Speed	50-70Km/h(31.07-43.50mph)	Power	> 1000W
Grade Ability	15-20°	Passengers	1
Displacement	> 250cc(>8.45fl.oz)	Voltage	12V
Brake System	Front drum+Rear drum	Body Type	Open
Curb Weight	≥500kg(≥1102.31lb)	Fuel Tank Capacity	10-20 L(2.64-5.28gal)
Type	Right three-wheeled motorcycle	Place of Origin	Chongqing, China
Tire Size	5.00-12	Brand	BEYEE
Size	Standard Size	Product name	Five
Brand	BEYEE	Engine	250CC water cooled engine
Cargo box size	2.5*1.4m	Front Shock Absorber	09 shock absorption
Rear Spring Leafs	5+2	Wheels Type	Three
Rear Axle	Full buoyancy afterburner 220 drum brake	Rear Brake	Hydraulic
Chassis	50*100

product-1070-602

why choose us?

We provide CKD, SKD tricycle. Any special requirement for the packing, please contact us.Each model materials will be packed separately the packing system will follow the ISO standards for packing.The fragile materials must be packed as per ISO fragile materials packing system We have most professional packagingtransport of large trucks to the seaport and international transport cooperation.

one-stop solution

professional team

high quality